UNIVERSAL 2-IN-1 PRIMER AND UNDERCOAT

UNIVERSAL 2-IN-1 PRIMER AND UNDERCOAT

AURO 304 Silicate Binder for AURO Silicate & Airfresh Paints

AURO 304 Silicate Binder for AURO Silicate & Airfresh Paints

UNIVERSAL 2-IN-1 PRIMER AND UNDERCOAT

Minimal VOC dual-purpose white primer/undercoat for interior wood and ferrous metals. Can be used with appropriate topcoats and is perfect for use with our own Greenpaints Semi Gloss. Apply one coat of primer on interior surfaces followed by two coats of water-based topcoat.

  • Water-based, minimal VOC (max. 30g/l)
  • Quick drying (recoatable within 2 hours)
  • High opacity
As low as £12.50
Availability: In stock
SKU
UNIPR

Typical Use

Minimal VOC dual-purpose white primer/undercoat for interior wood and ferrous metals. Can be used with appropriate topcoats and is perfect for use with our own Greenpaints Semi Gloss. Apply one coat of primer on interior surfaces followed by two coats of appropriate water-based topcoat.

Colour Range: White

Application Method: Brush, roller or spray.

Drying Times
Single coat at standard thickness:
Touch dry: Dependent upon temperature and humidity.
Recoat: 2 hours.

Spread Rate (typical) 8 to 10 sq.m per litre.

Surface Preparation

  • Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.
  • Thoroughly rub down previously painted surfaces, using ‘wet flatting’ (wet & dry paper used wet) method where possible, then wipe off with a damp, lint free cloth.
  • Treat any knots in wood with an appropriate knotting solution.
  • Ferrous metals: remove any loose rust and mechanically abrade and degrease prior to painting.

Application Details

  • Stir thoroughly before use.
  • New or bare surfaces: 2 coats of Universal Primer Undercoat.
  • Previously painted surfaces: 1 coat of Universal Primer Undercoat.
  • Allow to dry for a minimum of 2 hours between coats.

Cleaning tools:

Wash brushes out with soap and water.

Available SizesApprox. coverage m2
1 L8-10
2.5 L20-25
5 L40-50

Coverage quoted is approx and may vary due to application or absorbtion from the substrate etc.; figures are for total area one coat would cover.

  • Pigment: Non-lead pigments.
  • Binder: Acrylic Copolymer.
  • Solvent: Water.
  • Volume Solids; 36% (nominal).